|
| ●Contents |
|
BBK provides you highly reliable Japanese Tools
and also our own well engineered items.
|
|
|
|
| |
 |
| Clutch Type Flaring Tool 800-FN |
● |
Eccentric Cone Type. |
● |
Specifically designed for high pressure R410A systems, which require deeper flaring compared to R22.(Also used for R407C, R404A, R22, R12 etc) |
● |
Off-center cone enables to make strong, uniformed flare with no thin spot.
|
● |
800-FN Clutch function prevents over processing. |
● |
For sizes 1/4”,5/16”,3/8”,1/2”,5/8” and 3/4” O.D. tubing. |
● |
Made in Japan. |
| |
|
|
|
|
|
 |
Clutch Type Flaring Tool 800-FDN
with Ratchet Handle and Adaptor for a power drill |
● |
Eccentric Cone Type. |
● |
Can be operated with a power drill, using the special adaptor included.
:The operation with a power drill is suit for the heavy users, relieving the load of operation by hand. |
● |
Also can be used with included Ratchet Handle. |
● |
For sizes 1/4”,5/16”,3/8”,1/2”,5/8” and 3/4” O.D. tubing. |
● |
Made in Japan. |
| |
|
|
|
|
 |
Clutch Type Flaring Tool 800-FNR
with Ratchet Handle |
● |
Eccentric Cone Type. |
● |
Can be operated with the included Ratchet Handle. |
● |
For sizes 1/4”,5/16”,3/8”,1/2”,5/8” and 3/4” O.D. tubing. |
● |
Made in Japan. |
| |
|
|
|
|
 |
| Clutch Type Flaring Tool 800-FNS with Short Gauge Bar |
● |
Eccentric Cone Type. |
● |
Especially designed for installation of residential air conditioners. |
● |
Less weight with the short gauge bar for 3 sizes. |
● |
For sizes 1/4”,3/8” and 1/2” O.D. tubing. |
● |
Made in Japan. |
|
|
|
|
|
|
| Torque Wrench |
● |
Wrenches to provide proper torque to the Flare nut, avoiding gas leak due to too weak torque and damage to the Flareｄ part because of too strong torque. |
● |
Designed, engineered by BBK. |
| |
ITEM No. |
Nut Size |
Torque |
Length |
ATQ-160 |
1/4” |
17㎜ |
16Nm(163kgf/㎝) |
215㎜ |
ATQ-180 |
1/4” |
17㎜ |
18Nm(183kgf/㎝) |
215㎜ |
ATQ-300 |
3/8” |
22㎜ |
30Nm(305kgf/㎝) |
260㎜ |
ATQ-380 |
3/8” |
22㎜ |
38Nm(387kgf/㎝) |
260㎜ |
ATQ-500 |
1/2” |
26㎜ |
55Nm(560kgf/㎝) |
260㎜ |
ATQ-550 |
1/2” |
26㎜ |
55Nm(560kgf/㎝) |
260㎜ |
ATQ-750 |
5/8” |
29㎜ |
75Nm(765kgf/㎝) |
290㎜ |
ATQ-800 |
5/8” |
27㎜ |
80Nm(815kgf/㎝) |
290㎜ |
ATQ-1000 |
3/4” |
36㎜ |
100Nm(1019kgf/㎝) |
370㎜ |
ATQS-1 |
| ATQ-160 & ATQ-300 |
Torque wrench set with soft carryng |
|
ATQS-2 |
| ATQ-180 & ATQ-380 |
Torque wrench set with soft carryng |
|
ATQS-41 |
ATQ-180 & ATQ-380
& ATQ-550 & ATQ-750 |
Torque wrench set with plastic case |
|
|
| |
|
|
|
|
 |
| Automatic Charging Scale BS-501 |
● |
For refrigerant charging/recovery. |
● |
Automatic charging with alarm function. |
● |
Large, visible LED display with back light function. |
● |
Excellent endurance against shock. |
● |
Designed, engineered by BBK |
|
| Capacity |
50kg |
Power:9V batterie
:AC Adapter 100～230V A Type |
| Pesolution |
±5g |
| Platform size |
230×230㎜ |
Operation Temp |
-5～50℃ |
| Weight |
4.6kg |
Size |
440×320×90㎜ |
|
|
|
|
 |
| Manifold kit (with hoses) in a carring case 410-FMＫ |
● |
Typically designed for R410A A/C Equipment with 1/2”-20 UNF fittings, whose pressure is about 1.6 times as much as the one of R22. |
● |
Three super neoprene o-ring design provides maximum sealing power. |
● |
Aluminum block manifold with a sight glass / Quick action knobs. |
| |
|
|
|
|
 |
| Automatic Tube Cutter TC-320T |
● |
For hard or soft copper, aluminum, brass, thin wall steel, stainless steel, monel, titanium and other tubing. |
● |
For 3/16”～1-1/4” (4mm to 32mm) O.D. tubing. |
● |
Include X2 general purpose cutter wheel. |
● |
Wt. 260g. |
|
|
|
|
|
 |
| Inner Reaming and Deburring Tool 211-F |
● |
For 1/8” to 7/8” O.D. tubing. (3-22mm) |
● |
Reams inside edge of tube with unique 11 blade cutter. |
● |
For copper, aluminum and brass tubing. |
● |
Wt. 180g |
● |
Made in Japan. |
| |
|
|
|
|
 |
Control Valve
A44000S (1/2”-20 UNF)
A33000S (1/4”Flare) |
● |
To prevent spurts of refrigerant from both Service Port and charging hose. |
● |
Made in Japan. |
| |
|
|
|
|
 |
| Cylinder Adapter |
CM4-6 |
|
●1/2”-20 UNF MALE X 3/4” FEMALE. |
CM2-6 |
|
●1/4” Flare MALE X 3/4” FEMALE. |
|
|
● |
Made in Japan. |
|
|
|
 |
| Adapter |
| AD2M-4P |
|
●1/4” Flare MALE X 1/2”-20 UNF FEMALE. |
AD4M-2P |
|
●1/2”-20 UNF MALE X 1/4” Flare FEMALE. |
|
|
● |
Made in Japan. |
|
|
|
 |
Air Conditioning Service Kit for R410A
ESK-410IN |
|
Contents |
| 1 |
Manifold and Hoses：410-PNC |
| 2 |
Control Valve ：A44000S |
| 3 |
Cylinder Adapter : CM4-6 |
| 4 |
Tube Cutter : TC-320T |
| 5 |
Reamer : 211-F |
| 6 |
Flaring Tool : 800-FN |
| 7 |
Torque Wrench |
| |
：ATQ-180 ATQ-380 ATQ-550 ATQ-750 |
| 8 |
Aluminum Case |
|
|
| |
